1/32 Tamiya F-15E Strike Eagle
ちょっと順番が逆になってしまったが、少し前にグレートモデル www.greatmodels.com に注文していたCECのACES2シートとF-15E update、エデュアルドのF-15Eが届た。

Although shown in the previous session, Here are new stuff arrived from GreatModels.com, which are Eduard's F-15E, CEC's F-15E update and ACES II ejection seat.
塗装指示はHUD全体をクリアーグリーンであるが、私は縁だけグリーンがお気に入りである。

I prefer painting just the sides of HUD green instead of whole screen.

いかがでしょうか

How's this?
エナメルXF-54でドライブラッシングして、雰囲気を出す。ドライブラッシングは控えめがポイント。ドライブラシ専用筆にエナメルをつけ、ティッシュで拭いて、”しばらく”待ってこすりつけるのがミソ。

Dry-brush with XF-54 enamel. The trick is to stop before you feel it's enough. Use dedicated brush. Dip it into paint, then rub off exess with tissue paper and then wait a moment before brushing.
機首の塗装を始める前に計器パネルを仕上げておく。指定の色でエアーブラシ。

Before painting nose part, complete inside instrument panel. Spray instructed color in manual.
言い忘れていたが、レーダーコーンが開いている状態はディスプレイ上好きでないので、接着してしまった。境目をきれいに処理するため、パテで埋めラインと段差を消し、その直ぐ脇に新しいパネルラインを彫る。曲面用筋彫り定規にマスキングテープを貼り付ける。これをコーンに貼り付け、筋彫りを行う。
I forgot to mention it that I did not like the appearance of the open nose cone for display, so I glued it closed. In order to get a clean finish, put putty into the gap and fill lines and steps completely. Then make a new line just a little bit forward from original line. To do so, attach Hasegawa's curved scribing template with mask tape, then re-scribe the line along it.
新しいライン

This is the new line..
機器パネルの塗装に戻って、
まずメタルカラーを手塗りして、綿棒で磨く。


Back to instrument panel. Paint Mr. Metal Color, then buff up.
ワイヤーをMr.メタルカラーのカッパーとエナメルのXF-1で色つけ

Use Mr. Metal Color Copper and enamel XF-1 for wiring.
ハセガワの1/48ウエポンセットのデカールから適当なものを拝借して、この通り。

Use some decals from Hasegawa's 1/48 weapon set.
パネル裏のピン跡は消す。このように細い隙間のピン消しはペーパーでは大変。まずノミで削り取ると楽。

It's hard to remove pin's mark in such narrow spot. A scraper like this works well.
脚収納パネル裏のピン跡も同じように消して、下地処理後、塗装して完成。

Remove all pin marks on the inside panel of landing gear struts. Then apply primer and spray paint.
メインギア

Main gear struts
収納パネルの表側をエアースプレイする。粘土と針金で固定。

Use reusable adhesive "fun tack" and wire for spraying.