エナメル黒でウォッシング Wash with enamel black |
|
余分はエナメル黒をふき取り、エナメルの灰色、シルバーなどでドライブラシ Remove excess enamel black with cotton swab dipped to enamel thinner. And then dry brush with enamel silver and light grey. |
|
配線などをエナメルシルバーや黒でいれれば完成。 Lastly, paint wires and buckles with enamel silver. I like Model Master's chrome silver and Tamiya's silver paint maker for shining surface. |
|
遠くからの写真しかなくこの後部目隠しの表面がどうなっているか分からなかったが、このような模様が見えるので適当にこしらえた。 I have only small photo. So I can not find out how this canopy cover's surface look alike. It seems some kind of checker mark like this.. So I made it as my own imagination. |
|
エナメル黒でウォッシング Wash by enamel black. |
|
前部のキャノピはスモークグレーに見えるので、Mr.カラー101番を内側からエアーブラシ Also according to some photos, Front canopy might be smoky grey. So I air-brush inside the canopy with Mr. Color 101. |
|
フラップ内側は塗装してからフラップを取り付ける。まずはブルーグレイ色をエアーブラシ Air-brush bluish grey to inside flaps. |
|
エナメル黒でウォッシングして Wash by enamel black |
|
縞模様を残しながらふき取る Rub with cotton swab dipped in enamel thinner. |
|
フラップを接着 Put flaps. |
|
先端は溶きパテをぬり、サンドかけして仕上げる。 Put putty on the tip of the flaps. Sand and clean it after putty is cured. |