前部の防御ネット枠はポルシェ砲塔に付属の枠を短くして利用。

I used the front mesh frame from the Porsche turret kit. I trimmed it to size and glued it together.
2月の日本出張時に持ち帰った金網がさっそく役立った。

Metal mesh sheet for scale models is sold at major hobby shop in Japan.
こんな感じ。

Nice fit!
本来なら網の枠が必要だが、金網の針金が太くて大きく浮き上がってしまうので、枠をつけるのは辞めた。が、仕上がりには特に気にならない。

I did not bother making the frame for the mesh, because the mesh is too thick to fit inside. It looks OK without a frame.
ABER製消火器金具は素晴らしい出来である。

ABER's holder for the fire extinguisher looks really nice.
ジャッキ台の取っ手は1/35の何かのエッチングパーツの残り物を利用。
燃料タンク通気パイプの完全自作。
アンテナケースも真鍮パイプと銅パイプで作り直し。

I scratch-built the air pipe for the fuel tank with brass rod, Evergreen strip, a brass bolt head and Model Kasten's nuts & bolts.
I used left over 1/35 photoetch parts for the handle on the wooden jack base.